LED rectifier with controller and infrared remote control, power supply and 12 V RGB color change kit with waterproof silicone coated LED strip, 2038RGB-R2 + 3369 + 3208

Price: [price_with_discount]
(as of [price_update_date] - Details)


[ad_1]
These LED color-changing flexible strips are suitable for almost any application. Each kit comes with a 16.4 ft (5 m) LED lamp reel, controller with wireless infrared remote control and power supply.

Specification (LED strip)
* LED quantity/type: 150x SMD5050 RGB
* Input voltage: 12 VDC
* Power: 21.3 W
* Light emission angle: 120o
] * Dimmable: Yes
* IP Rating: IP65
* Pin Order: + RGB
* PCB Color: White
* Width: 10 mm
* Length: 16.4 ft ( 5 meters)
* Wire: 22 AWG
* Compliance: CE, RoHS
* Lifetime: 35,000 hours
* Warranty: 1 year

19659003] * Fully-expanded LED strips
* Any bare conductors at the other end of the LED strips must not touch each other (or any metal object), causing a short circuit.
* Connect the 4-pin connector of the controller to the LED light bar
* Connect the DC socket of the power supply to the controller.
* Remove the plastic seal from the wireless remote control battery compartment.
* Please check carefully that all connections are correct and safe, then plug in the power cord.

Note
* Although the supplied controller can handle the power requirements of two such strips, the power supply can only drive one strip.
*Do not extend the LED light bar by directly attaching additional parts
*Test all components before permanent installation
*Ensure that the wires at the other end of the LED light bar do not touch each other (or any metal object), otherwise Causes a short circuit.
* LED strips can be cut every 3 LEDs, every 4", at the designated cutting marks
*Only LED strips are waterproof; all other components and connections must be protected from wetting

Complete kit includes: Wireless infrared remote control, power supply and waterproof silicone coated LED strips
set static color, adjust brightness, select various auto color change modes via wireless infrared remote control
LED light strips every 3 LED can be cut, approximately 4" marked to accommodate different length requirements
flexible - practically suitable for any conceivable space
eco-friendly - use very little energy, no harmful radiation



[ad_2]

---

Orignal From: LED rectifier with controller and infrared remote control, power supply and 12 V RGB color change kit with waterproof silicone coated LED strip, 2038RGB-R2 + 3369 + 3208